Allview P6 Energy Lite APN Settings 2024: Set Up APN and MMS
Want to know how to set APN on Allview P6 Energy Lite? Allview P6 Energy Lite is an Android smartphone designed by Allview. This guide will show you how to set up APN (Access Point Name), internet, hotspot, and MMS settings on Allview P6 Energy Lite 2024. These settings support 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Follow these steps to access high-speed internet on Allview P6 Energy Lite with any SIM.
What is APN Settings for Allview P6 Energy Lite?
APN stands for Access Point Name. To access the internet on Allview P6 Energy Lite, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Allview P6 Energy Lite APN Settings
How to set APN on Allview P6 Energy Lite? To set/configure APN -Access Point Name on your Allview P6 Energy Lite, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Allview P6 Energy Lite, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Allview P6 Energy Lite MMS Settings
How to set MMS on Allview P6 Energy Lite? MMS stands for Multimedia Messaging Service. To receive MMS on your Allview P6 Energy Lite, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Allview P6 Energy Lite, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Allview P6 Energy Lite. If you still cannot access the internet after successfully configuring APN on your Allview P6 Energy Lite, let us know by leaving a comment below.
