Htc Wildfire E1 plus APN Settings 2025: Set Up APN and MMS
Looking for instructions to set APN on Htc Wildfire E1 plus? Htc Wildfire E1 plus is an Android device by Htc. In this tutorial, I will guide you on how to set up APN (Access Point Name), internet, hotspot, and MMS settings on Htc Wildfire E1 plus 2025. These settings work with 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy fast internet on your Htc Wildfire E1 plus using any SIM card with this method.
What is APN Settings for Htc Wildfire E1 plus?
APN stands for Access Point Name. To access the internet on Htc Wildfire E1 plus, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Htc Wildfire E1 plus APN Settings
How to set APN on Htc Wildfire E1 plus? To set/configure APN -Access Point Name on your Htc Wildfire E1 plus, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Htc Wildfire E1 plus, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Htc Wildfire E1 plus MMS Settings
How to set MMS on Htc Wildfire E1 plus? MMS stands for Multimedia Messaging Service. To receive MMS on your Htc Wildfire E1 plus, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Htc Wildfire E1 plus, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Htc Wildfire E1 plus. If you still cannot access the internet after successfully configuring APN on your Htc Wildfire E1 plus, let us know by leaving a comment below.
