Intex Aqua Power + APN Settings 2024: Set Up APN and MMS
Are you searching for the way to set up APN on Intex Aqua Power +? Intex Aqua Power + is an Android smartphone crafted by Intex. In this guide, I will explain how to configure APN (Access Point Name), internet, hotspot settings, and MMS on Intex Aqua Power + 2024. These settings will work seamlessly for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy high-speed internet on your Intex Aqua Power + with any SIM card using this method.
What is APN Settings for Intex Aqua Power +?
APN stands for Access Point Name. To access the internet on Intex Aqua Power +, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Intex Aqua Power + APN Settings
How to set APN on Intex Aqua Power +? To set/configure APN -Access Point Name on your Intex Aqua Power +, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Intex Aqua Power +, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Intex Aqua Power + MMS Settings
How to set MMS on Intex Aqua Power +? MMS stands for Multimedia Messaging Service. To receive MMS on your Intex Aqua Power +, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Intex Aqua Power +, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Intex Aqua Power +. If you still cannot access the internet after successfully configuring APN on your Intex Aqua Power +, let us know by leaving a comment below.
