Lenovo Vibe Z K910 APN Settings 2024: Set Up APN and MMS
Need instructions on setting APN on Lenovo Vibe Z K910? Lenovo Vibe Z K910 is a sophisticated Android device produced by Lenovo. This tutorial will walk you through setting up APN (Access Point Name), internet, hotspot, and MMS settings on Lenovo Vibe Z K910 2024. These configurations are compatible with 2G, 3G, 4G, LTE, VoLTE, and 5G networks, allowing you to access fast internet on your Lenovo Vibe Z K910 with any SIM card.
What is APN Settings for Lenovo Vibe Z K910?
APN stands for Access Point Name. To access the internet on Lenovo Vibe Z K910, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Lenovo Vibe Z K910 APN Settings
How to set APN on Lenovo Vibe Z K910? To set/configure APN -Access Point Name on your Lenovo Vibe Z K910, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Lenovo Vibe Z K910, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Lenovo Vibe Z K910 MMS Settings
How to set MMS on Lenovo Vibe Z K910? MMS stands for Multimedia Messaging Service. To receive MMS on your Lenovo Vibe Z K910, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Lenovo Vibe Z K910, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Lenovo Vibe Z K910. If you still cannot access the internet after successfully configuring APN on your Lenovo Vibe Z K910, let us know by leaving a comment below.
