Micromax Bolt Supreme 2 Q301 APN Settings 2025: Set Up APN and MMS
Need instructions on setting APN on Micromax Bolt Supreme 2 Q301? Micromax Bolt Supreme 2 Q301 is a sophisticated Android device produced by Micromax. This tutorial will walk you through setting up APN (Access Point Name), internet, hotspot, and MMS settings on Micromax Bolt Supreme 2 Q301 2025. These configurations are compatible with 2G, 3G, 4G, LTE, VoLTE, and 5G networks, allowing you to access fast internet on your Micromax Bolt Supreme 2 Q301 with any SIM card.
What is APN Settings for Micromax Bolt Supreme 2 Q301?
APN stands for Access Point Name. To access the internet on Micromax Bolt Supreme 2 Q301, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Micromax Bolt Supreme 2 Q301 APN Settings
How to set APN on Micromax Bolt Supreme 2 Q301? To set/configure APN -Access Point Name on your Micromax Bolt Supreme 2 Q301, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Micromax Bolt Supreme 2 Q301, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Micromax Bolt Supreme 2 Q301 MMS Settings
How to set MMS on Micromax Bolt Supreme 2 Q301? MMS stands for Multimedia Messaging Service. To receive MMS on your Micromax Bolt Supreme 2 Q301, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Micromax Bolt Supreme 2 Q301, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Micromax Bolt Supreme 2 Q301. If you still cannot access the internet after successfully configuring APN on your Micromax Bolt Supreme 2 Q301, let us know by leaving a comment below.
