Micromax Selfie 2 Q4311 APN Settings 2025: Set Up APN and MMS
Trying to find out how to set APN on Micromax Selfie 2 Q4311? Micromax Selfie 2 Q4311 is an Android phone by Micromax. In this tutorial, I'll explain how to configure APN (Access Point Name), internet, hotspot, and MMS settings on Micromax Selfie 2 Q4311 2025. These settings are suitable for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Get high-speed internet on Micromax Selfie 2 Q4311 with any SIM by following this guide.
What is APN Settings for Micromax Selfie 2 Q4311?
APN stands for Access Point Name. To access the internet on Micromax Selfie 2 Q4311, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Micromax Selfie 2 Q4311 APN Settings
How to set APN on Micromax Selfie 2 Q4311? To set/configure APN -Access Point Name on your Micromax Selfie 2 Q4311, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Micromax Selfie 2 Q4311, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Micromax Selfie 2 Q4311 MMS Settings
How to set MMS on Micromax Selfie 2 Q4311? MMS stands for Multimedia Messaging Service. To receive MMS on your Micromax Selfie 2 Q4311, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Micromax Selfie 2 Q4311, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Micromax Selfie 2 Q4311. If you still cannot access the internet after successfully configuring APN on your Micromax Selfie 2 Q4311, let us know by leaving a comment below.
