Tecno Spark Power 2 APN Settings 2025: Set Up APN and MMS
Need instructions on setting APN on Tecno Spark Power 2? Tecno Spark Power 2 is a sophisticated Android device produced by Tecno. This tutorial will walk you through setting up APN (Access Point Name), internet, hotspot, and MMS settings on Tecno Spark Power 2 2025. These configurations are compatible with 2G, 3G, 4G, LTE, VoLTE, and 5G networks, allowing you to access fast internet on your Tecno Spark Power 2 with any SIM card.
What is APN Settings for Tecno Spark Power 2?
APN stands for Access Point Name. To access the internet on Tecno Spark Power 2, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Tecno Spark Power 2 APN Settings
How to set APN on Tecno Spark Power 2? To set/configure APN -Access Point Name on your Tecno Spark Power 2, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Tecno Spark Power 2, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Tecno Spark Power 2 MMS Settings
How to set MMS on Tecno Spark Power 2? MMS stands for Multimedia Messaging Service. To receive MMS on your Tecno Spark Power 2, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Tecno Spark Power 2, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Tecno Spark Power 2. If you still cannot access the internet after successfully configuring APN on your Tecno Spark Power 2, let us know by leaving a comment below.
