Ulefone Power Armor 14 Pro APN Settings 2025: Set Up APN and MMS
Looking for instructions to set APN on Ulefone Power Armor 14 Pro? Ulefone Power Armor 14 Pro is an Android device by Ulefone. In this tutorial, I will guide you on how to set up APN (Access Point Name), internet, hotspot, and MMS settings on Ulefone Power Armor 14 Pro 2025. These settings work with 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy fast internet on your Ulefone Power Armor 14 Pro using any SIM card with this method.
What is APN Settings for Ulefone Power Armor 14 Pro?
APN stands for Access Point Name. To access the internet on Ulefone Power Armor 14 Pro, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Ulefone Power Armor 14 Pro APN Settings
How to set APN on Ulefone Power Armor 14 Pro? To set/configure APN -Access Point Name on your Ulefone Power Armor 14 Pro, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Ulefone Power Armor 14 Pro, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Ulefone Power Armor 14 Pro MMS Settings
How to set MMS on Ulefone Power Armor 14 Pro? MMS stands for Multimedia Messaging Service. To receive MMS on your Ulefone Power Armor 14 Pro, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Ulefone Power Armor 14 Pro, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Ulefone Power Armor 14 Pro. If you still cannot access the internet after successfully configuring APN on your Ulefone Power Armor 14 Pro, let us know by leaving a comment below.
