Ulefone Power Armor 18T APN Settings 2025: Set Up APN and MMS
Need instructions on setting APN on Ulefone Power Armor 18T? Ulefone Power Armor 18T is a sophisticated Android device produced by Ulefone. This tutorial will walk you through setting up APN (Access Point Name), internet, hotspot, and MMS settings on Ulefone Power Armor 18T 2025. These configurations are compatible with 2G, 3G, 4G, LTE, VoLTE, and 5G networks, allowing you to access fast internet on your Ulefone Power Armor 18T with any SIM card.
What is APN Settings for Ulefone Power Armor 18T?
APN stands for Access Point Name. To access the internet on Ulefone Power Armor 18T, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Ulefone Power Armor 18T APN Settings
How to set APN on Ulefone Power Armor 18T? To set/configure APN -Access Point Name on your Ulefone Power Armor 18T, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Ulefone Power Armor 18T, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Ulefone Power Armor 18T MMS Settings
How to set MMS on Ulefone Power Armor 18T? MMS stands for Multimedia Messaging Service. To receive MMS on your Ulefone Power Armor 18T, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Ulefone Power Armor 18T, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Ulefone Power Armor 18T. If you still cannot access the internet after successfully configuring APN on your Ulefone Power Armor 18T, let us know by leaving a comment below.
